SOCIAL MEDIA 
  

     


CONTACT US

Debbie Murray
LARSS Program Coordinator
Virginia Space Grant Consortium
Phone: (757)864-5215
Fax: (757)864-9701
Deborah.B.Murray@nasa.gov

Sarah Pauls
LARSS Program Assistant
Virginia Space Grant Consortium
Phone: (757)864-4394
Fax: (757)864-9701
Sarah.E.Pauls@nasa.gov

Shelley Spears
Director, Educational Outreach
National Institue of Aerospace
Phone: (757)325-6701
Fax: (757)325-6701
Shelley.Spears@nianet.org

Dr. Thomas Pinelli
University Affairs Officer
Office of Education, NASA LaRC
Phone: (757)864-2491
Fax: (757)864-9701
Thomas.E.Pinelli@nasa.gov


APPLICATION DEADLINES:

Fall 2012
Deadline May 25, 2012

Spring 2013
Deadline October 12, 2012

Summer 2013
Deadline February 1, 2013

 
PROJECT ABSTRACTS

The following abstracts were taken from student technical reports in 2011. 


Detection and Localization of Clear-Air Turbulence Using Cross-
Correlation and Multilateration of Infrasonic Signals
Thermal Testing in the Eight Foot High Temperature Tunnel 
 The Technical Development of the Electric Work Environment in 2030  Steel Sheet Pile Wall and Lower Wall Helical Tiebacks:
Installation Problems Due to Site Conditions and Order of Procedures
PRSEUS Structural Concept Properties Testing NASA Langley Research Center’s Climate Change Adaptation Plan 
 Langley Child Development Center Institutions and Management 
Computational Fluid Dynamic Analyses For The KAHU Unmanned
Aerial Vehicle Configuration
A Comprehensive Review of Technology Readiness Metrics 
New Town Phase 4 Conceptual Design Development  Simulating the Deployment of a 300 kW
Roll-Out Solar Array Using MSC Adams
 
Laser Remote Sensing Branch, Engineering Directorate  Paxos: A Constrained Consensus 
3-D Desktop Personal Printing and Applications   
 Minimizing Induced Drag with a Linked Swarm Prediction of Jet Noise 
A Self-Stabilizing Byzantine-Fault-Tolerant Clock Synchronization
Protocol Mathematical Proof 
Computational Modeling of the Radiation Shielding Capabilities of
Advanced Materials in Space Environments 
Surface Preparation for Adhesive Bonding of Aerospace Materials Modeling the Relationship between Pilot Demographics, Performance, and Acceptance of Interval Management with Spacing Procedures for NextGen 
Coordinating Teacher Professional Development Workshops Using
NASA Resources
 Output-Error Parameter Estimation Applied to Forced-Oscillation
Wind Tunnel Measurements
Russia Disasters and Human Health CALIPSO Trajectory Model
Investigation of Alternative Working Practices to Advance Langley Research Center Activities with the News Media Team
Python Implementation for Future Modeling of Different Boeing Rod-Stringer Wrap Configurations Characterization of Test Instrumentation Used for the Orion MPCV
BTA Test
Global optimization of multivariate polynomial functions 
with infinite precision arithmetic
Graphical User Interface for Lidar Level 1 Data 
 Loads Analysis of Subscale UAV for Airframe Health Diagnosis Algorithm Research  Preparations for a Supersonic Controlled Instability Transition Experiment
Research Directorate, Aerothermodynamics Branch
Space Operations Mission Directorate
 Simulation of Ultrasonic Waves for Nondestructive Evaluation
A Robust Localization Scheme for Interpolation of Unstructured Grids  Lunar Harvest: A Video Game
Blended Trailing Edge ADS-B Integration into EDGE Project
Modernization of ANOPP Probabilistic Design of Two-Stage-To-Orbit Launch Vehicles
Increasing accessibility of formal methods reports by example Innovating Alternative Workplaces at NASA LaRC
CALIPSO Trajectory Model - Smith Construction of Facilities (CoF)
Eigenstructure Assignment for Observer-Based Actuator Fault Detection: An Algorithm for Residual Generation  Determining Dynamic Stability Coefficients of an
Axi-Symmetric Body at Terminal Velocity
Technological Advances: 2025 and Beyond
Future technology and security integration at Langley Research Center
 
 Technological Advances: 2025 and Beyond
Future technology and security integration at Langley Research Center
Mars Lava Tube Mission: Vertical Take off and Landing Design Concept Trade Study
Acceptance Test Plan for the Compact Jet Engine Simulator’s Fuel Supply  Infrasound Detection in Urban Environment
Summer of Innovation Airborne Wind Energy Demonstration Unit
Small Satellite Research Laboratory The Effect of Damping in Rigid Body Kinematic Modeling for Hydro Impact Basin Tests
Design and Testing of the Multi-Purpose Contour Plot Program Optic Bench Analysis for IR CDS
Airborne Wind Energy Harvesting  Imaging and Photographic Technology
   An Alternative Analysis Method for Second-Order Response Surface Models in Split-Plot Experiments
 Analysis of Propulsion and Shielding Technologies for Rapid Human Mars Transit  Developing a TReK Interface using Visual Studios
 Global Climate Change Education website: using, developing, and debugging the Drupal web platform  You Invent, I Market. We Succeed.
 Trim Tab Effects on Aerodynamic and Aerothermodynamic Environment of Blunt Body Configurations Stiffness Values of Longerons from the International Space Station’s Solar Array Wings 
 SRO with a Splash of History  Robust Control Design Using Failure Domain Bounding with Applications to Uncertain Nonlinear Dynamic Systems
 Method to Find and Calculate Necessary Flow Values to for the Prediction of Self-Noise  Time-varying Moment of Inertia Simulation Module Development for POST II
 Structural Design of the Multifunctional Instrument Console used to Measure Acoustic Impedance from the Grazing Flow Incidence Tube  Vision Based Autonomous Kite Control for Airborne Wind Energy
Development of PRSEUS Composite Panels for Future Aircraft Use Evaluation of the LaRC “MindShift” Physiological Training Technology
 3D Dynamic Modeling of a SPLASH BTA Test The Application of Particle Image Velocimetry to the Observation of Turbulent Spot Development
 Determination of Inertial Properties using the Photogrammetric Hybrid Pendulum Method (PHPM)  Activities with the News Media Team
Electro-Mechanical Properties of Nanostructures Geant4 Simulated Electron Transport in Slabs
Implementation of Test Instrumentation Used at the
Landing and Impact Research Facility
Investigations in Support of Upcoming Compact Jet Engine Simulator Testing
Legislative Affairs and News Media Team Modeling and Simulation
NASA UH-60A Full-Scale Airloads Rotor Blade Deformation Measurements Passive Mitigation of Lunar Dust Adhesion
Recording and Analyzing Transient Electromagnetic Signals Using Personal Computer Based Audio Equipment  Sensor Inter-calibration using Spectral Data from ENVISAT. . .
 Split Flux Forms for Discretely Conservative Conservation Laws and the Gibbs Phenomena  STAMP Analysis of Hudson River Midair Collision
   System Identification and Aeroelastic Response of a 2DOF Pitch-and-Plunge Wing Model
 Validation of the Finite Element Method to Model Sound Radiation from a Vibrating Piston  Engineering Directorate, Atmospheric Flight and Entry Systems Branch
 Wind Tunnel Measurements . . .  Reverse Engineering the Composite Structure of the X-29 Wing
 CALIPSO Trajectory Model - Elder  Mission Design Process for the Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) Mission
 Advanced Materials and Processing Branch  Migrate The Contents Of The ii (Innovation Institute) Wiki To The SRO (Strategic Relationships Office) TWiki
 IRVE 3 Ground Support Equipment & The Future Workplace of Langley  Remote Sensing Monitoring of Pumice Rafts in the Pacific Ocean
 AirSTAR Battery Power Analysis  Performance Evaluation of a Non-Planar Solar Array
 Forced Oscillation Wind Tunnel Testing for FASER Flight Research Aircraft  Structure Analysis of a Panel-based Spacecraft with Vibro-Acoustic Loads
 Thermal Imaging Metrics to Qualify Damage in Carbon SiC Materials  Analyzing the Effects of Uncertainty on Conceptual Launch Vehicles
Airborne Wind Energy Harvesting Demonstration Unit   Airborne Nitrogen Dioxide Instrument Comparison during POLARCAT/ARCTAS and DISCOVER-AQ Airborne Campaigns
Sage III on ISS Abstract Low Frequency Sound Absorption with Acoustic Metamaterials
Piloted Simulation Evaluations of eXternal Vision Systems (XVS) Kinematics API for ANOPP2
   


“The LARSS program I think is a really valuable experience, it gave me some great exposure to some the research going on here at NASA Langley, gave me an opportunity to think about careers within NASA and coming back to Langley after I graduated from college, and gave me exposure to some of the people here at Langley and eventually lead me back to pursue a career here . . .”
- Charlie Cockrell, NASA LaRC